It’s quality that makes Waterco one of Australia's leading manufacturers of quality swimming pool and spa products. Waterco has a long standing reputation for the best-quality equipment for domestic swimming pools and spas at competitive prices.
Mr Pool Man is a certified and reputable Waterco dealer, all products are backed by standard factory warranty and we provide extensive pre purchase troubleshooting to assist in ensuring the first purchase is the correct one backed with after sales support on all Waterco equipment for lasting performance for years to come.
Features:
- Variable 3 speed control panel
- Permanent magnet brushless
- Variable 3 speed DC motor
- UV stabilised & corrosion resistant
- 50mm quick connect barrel unions for UPVC pipe
- Clear basket lid & large strainer basket
- High grade carbon/ graphite mechanical seal with 316 stainless steel spring assembly
- Strong single piece glass filled thermoplastic pump body
- Hydraulically efficient impeller and diffuser design
- Fan cooled thermal overload protection
Benefits:
- Energy saving variable speed motor
- Low noise operation
- Energy rating 8 stars
- Variable permanent magnet brushless DC motor
- 3 Year warranty
ECO (Low 1900 RPM): Filtration
99% of the time Most economical speed to operate the pool’s filtration system without any ancillary pool equipment attached to the re-circulation system. E.g., suction cleaners.
Medium (2400 RPM): Automatic pool cleaners
This speed will enable additional pool equipment for pool cleaning functions that require suction cleaners and low-pressure spa jets.
High (2850 RPM): Vacuuming and backwash
1% of the time Power speed selection for use with backwashing granular media filters (e.g., sand filters), manual pool vacuuming, and operating pool equipment with high water pressure requirements. E.g., water features and spa jets.
Speed Levels
Hydrostorm ECO-V has 3 factory set speed options ECO (Low), MED & HIGH, but with the additional advantage of fine adjustment in operating speed with 25 RPM increments. Fine-tuning of the pump’s motor speed ensures that the pump perfectly matches the flow requirements of the swimming pool, maximising energy savings and minimising pump noise. The Hydrostorm ECO-V operates most economically and with the lowest noise level using the ECO (Low) speed option. The Hydrostorm ECO-V has variable speed control, ranging from 1000 to 2850 RPM (revolutions per minute). The pump’s RPM can be viewed on the control panel display.
Quick Pool Pump Installation Guide:
Installing a pool pump is as simple as swapping out your old pump to a new one. But if the new one isn’t designed to retrofit with your current pump, then don’t worry too much, with some basic tools and some elbow grease, you’ll have your new pump installed in no time.
- Turn off the power to your pool equipment at the mains and switch off any valves leading to and from the pump to give you a splash free-environment while you work.
- Detach the pump from the power supply and unscrew the unions.
- Note: If you have an older pump that’s hard plumbed into your system then you may have to saw off the current pipes. Cut as close to the pump as possible. If this is the case then now might be a good time to install unions.
- Remove the pump and set aside. Position new pump on where the old pump previously was and assess what kind of plumbing needs to be done. It should be as simple as mounting the pump properly and screwing in unions. But if not, do the necessary plumbing work and connect your pump.
- Once the pump is plumbed in, open up all the valves and connect the power.
- Turn on the pump to see if the pump is working. Check for any leaks and that’s it!
View Alternative
