Zodiac T3 Automatic Pool Cleaner

• 1 x Zodiac T3 machine head complete with disc
• 1 x Hose Protector Mesh
• 10 x 1m Genuine Zodiac Twist Lock Hose
• 1 x Wheel Deflector with quick connector
• 1 x Hose Weight
• 1 x AD Flow Valve
• 1 x Universal Weir Cuff
• 1 x Pool Pulse 
• 1 x Quick Start Guide
• 1 x Warranty card

Easy Pool Suction Cleaner Assembly and Installation Guide:

Getting your new suction cleaner up and running is not as complicated as many people think and you can actually set one up in under five minutes! 

• Install the skirt over the base (wearing sole) of the suction cleaner. 
• If you cleaner uses wings, attach them from the rear to the front and clip them together.
• Install the deflector ring or bumper (if you skip this, the cleaner has the tendency to get caught in corners).
• Connect the hose lengths, just enough to cover the size of your pool. If you have extras, just keep them as spares. 
• Submerge the cleaner in your pool and hold the end of the hose against a return jet to blow out the air in the hoses. Once the cleaner has stopped bubbling, connect the hose to your skimmer’s vacuum plate. 
• If you’re using a flow valve, adjust the flow to the required level.
• Attach hose weights if your hose is pulling your cleaner up, and hose floats if your hose is dragging or getting tangled up.
• After using, disassemble your cleaner, give it a hose down with fresh water and store away from direct sunlight. Don’t forget to empty out your skimmer and pump baskets as well after cleaning the pool with a suction cleaner.

If you’re more of a visual-type person, here’s a video of how a suction cleaner is assembled. (It will open in a new window, don’t worry)