Inspect the Cover:

• Unfold (if you don’t have a roller): Lay out the cover on a clean, dry surface.
• Check for Damage: Look for any tears, holes, or worn areas.

Clean the Cover:

• Remove Debris: Brush off leaves, dirt, and debris.
• Wash: If needed, hose down the cover to remove grime and give it a good scrub down. You don’t want your pool cover to be the source of contamination over the winter.

Check Hardware and Anchors:

• Inspect Grommets and Straps: Ensure they are intact and functional.
• Replace Any Damaged Parts: Order replacements if necessary.

Measure and Position:

• Center the Cover: Position it evenly over the pool.
• Secure the Cover:  Secure the cover’s edges to prevent wind lift.
• Tighten Straps or Cables: Ensure a snug fit.

The first thing you should do is to answer the following questions:

• What type of pool do you have?
• How often will you be using the pool?
• Do you have small children/pets that are in danger of falling into the pool?
• Do you need to remove and install the covers often?
• What are the approximate measurements for your pool? (Measurements of the sides)
• What’s your working budget for the pool cover.

Once you have the answers to those questions, hit us up through the contact form below and we'll hook you up with an obligation-free pool cover estimate.

As the Australian summer fades and the cooler winds of winter approach, it’s time to ensure your pool remains a welcoming retreat while the rest of the country puts their pools to sleep.

As the Australian summer sun sets, it’s crucial to ensure your pool remains a sparkling oasis throughout the cooler months. Whether you're keeping your pool open over the winter or putting it to sleep, make sure to have a right chems for the right situation.