Spa Electrics LED Pool Light Retro GKRX Multi PLUS Colour

The Spa Electrics LED Pool Light GKRX Mutli Colour is the answer to all of your pool lighting needs! Designed and manufactured in Australia so you can be sure for its quality.

Spa Electrics are the industry leaders in LED pool and spa lighting with high quality materials coupled with the latest technology and design, the range of lights will transform any swimming pool or spa environment.

With a range of RetroFit lights that suit nearly all existing applications, it's a breeze to upgrade the look of your pool or spa. LED Pool lights are energy efficient and are incredibly bright and are the modern alternative to older style Halogen Pool lights. Spa Electrics lights come with extensive warranty and are backed by Mr Pool Man's customer satisfaction guarantee.

Check your local state regulations regarding installation requirements by authorised electrician if you are in QLD you can see the requirement here

Features:

• IRIS Remote Compatible ( additional purchase )
• Includes retro fit brackets ( suits both concrete and fiberglass installations )
• High intensity Ceramic Light Engine (LED) Technology
• Replaces 99% surface mount pool lights
• Simple Installation. Upgrade to LED in as little as 20 minutes
• No electrician required. Extra Safe Low voltage.
• Variable Voltage Operation on all 12, 24 & 32v AC Transformers
• Designed and manufactured in Australia
• Spa Electrics LED lights use around 88% less energy than standard halogen lights
  
• The LED Spa Electrics light will improve the look of your pool, and it will slash your electricity bill
• Overall Diameter: 238mm
• Thickness off the pool surface: 56mm
• 2 retro fit brackets can be drilled to fit existing screw configurations
• 8 colours with 

To change the colour on a Multi Colour or TRI colour LED pool light you need to toggle the on and off switch (power point) to cycle through the colour settings. Once you find the preset you like, leave the light on for 10 seconds and it will memorise that colour choice and you can then set the light to a timer and it will always revert back to your last colour setting.

To change the colour simply repeat the step above

Easy Installation Notes:

Check your local state regulations regarding installation requirements by authorised electrician if you are in QLD you can see the requirement here

Installing or upgrading your current pool lighting system can be done in as fast as 15 minutes per light fixture!

• To be completely safe, turn off the mains to everything connected to your pool. 
• Ensure that your power supply is currently outputting 12v. If not, you will need a pool LED light transformer.
• Unmount your existing pool light (be sure to keep the screws in a safe place) and bring the lights at least a meter away from the surface edge of the pool and on to a towel to be safe.
• Cut the cable as close to the existing light as close as possible. 
• Wipe down everything (including your hair!) to prevent water from dripping into exposed wires before you strip and connect the new lights according to the included instructions. 
• Test the pool light, coil the cable to the rear of the light and re-mount back into the pool. 
• Don’t forget to re-set your pool timers.