Aquaquip LED Light QC Multi Colour

Transform your back yard into a tropical oasis with Aqua Quip LED Pool Lights, an eye catching colour display, Aqua Quip Lights are a modern, slim and stylish way to lighten your pool or spa life! Aqua Quip LED Pool Lights create a party lifestyle atmosphere, with the colour LED lights creating a resort style feel to any back yard application. 

Aqua Quip Lights are Australian Made and suitable for Concrete pools, Fibreglass pools and Vinyl Pools. Retro Fit LED lights are easily installed without having to lower your pool water level and they work with all exisitng transformers! Aqua Quip is the award winning Australian Light brand in the Pool Supplies industry suiting all applications with their inovative design and leading warranty on all products.

• Save on Electricity. Led lights use 85% less power than Halogen lights
• Easy to Upgrade. Simple, easy to follow steps. No need to drain the pool
• Australian Made
• Energy efficient and super bright
• Multi Voltage and Suitable with all 12v-32v transformers
• Tough one-piece Impact Modified Acrylic Lens
• Extra Low Voltage ensures safety
• Made to all relevant Australian Standards & Regulations
• Utilises existing cable and transformer
• Caters for most brands – no electrician required
• QC (Quick Connect)
• 12 months warranty via Mr Pool Man

Aqua-Quip Surface Mounted Retro-Fit Lights are able to convert the following brands in concrete pools:

• Stroud Compact 150
• Stroud SM400
• Swimworld
• Waterco
• Filtrite
• Spa Electrics
• Poolrite
• Autumn Solar, Questa, Chameleon

To change the colour on a Multi Colour or TRI colour LED pool light you need to toggle the on and off switch (power point) to cycle through the colour settings. Once you find the preset you like, leave the light on for 10 seconds and it will memorise that colour choice and you can then set the light to a timer and it will always revert back to your last colour setting.

To change the colour simply repeat the step above

How to install a new LED pool light:

Installing or upgrading your current pool lighting system can be done in as fast as 15 minutes per light fixture!

• To be completely safe, turn off the mains to everything connected to your pool. 
• Ensure that your power supply is currently outputting 12v. If not, you will need a pool LED light transformer.
• Unmount your existing pool light (be sure to keep the screws in a safe place) and bring the lights at least a meter away from the surface edge of the pool and on to a towel to be safe.
• Cut the cable as close to the existing light as close as possible. 
• Wipe down everything (including your hair!) to prevent water from dripping into exposed wires before you strip and connect the new lights according to the included instructions. 
• Test the pool light, coil the cable to the rear of the light and re-mount back into the pool. 
• Don’t forget to re-set your pool timers.