Speck Badu Pump Super 90/350 Series 1.25HP

The Speck Super 90 Pump is the ideal choice for any domestic pool or spa pump application. It's designed to work quieter and smoother with a German design and engineering.

The Speck Super 90 Series will suit any application with an automatic pool cleaner, salt chlorination or heating system with no issues.

The easy to remove non-corrosive lid has a handle and the pump is made of only the highest quality materials. It provides flow rates from 230 to 500lpm and comes in 1.0, 1.25, 1.5 or 2.0 horsepower with a five-year warranty.

Features:

• A high resistance to corrosion and salt water
• Self-priming
• Stability at high fluid temperatures – up to 60°C
• No contact between motor and pump shaft with pool or spa water
• Quality mechanical seal
• Fan cooled – suitable for high ambient temperatures
• Closed impeller
• 316 Stainless steel motor shaft
• Easy to remove clear strainer lid
• Every pump wet tested for quality control
• *Note - Mechanical seal and bearings only covered by 12 month manufacturers warranty
  

Quick Pool Pump Installation Guide:

Installing a pool pump is as simple as swapping out your old pump to a new one. But if the new one isn’t designed to retrofit with your current pump, then don’t worry too much, with some basic tools and some elbow grease, you’ll have your new pump installed in no time. 

• Turn off the power to your pool equipment at the mains and switch off any valves leading to and from the pump to give you a splash free-environment while you work. 
• Detach the pump from the power supply and unscrew the unions. 
• Note: If you have an older pump that’s hard plumbed into your system then you may have to saw off the current pipes. Cut as close to the pump as possible. If this is the case then now might be a good time to install unions. 
• Remove the pump and set aside. Position new pump on where the old pump previously was and assess what kind of plumbing needs to be done. It should be as simple as mounting the pump properly and screwing in unions. But if not, do the necessary plumbing work and connect your pump. 
• Once the pump is plumbed in, open up all the valves and connect the power. 
• Turn on the pump to see if the pump is working. Check for any leaks and that’s it!

Warranty:

Speck Pumps come with a five (5) year warranty on the following wet end components: Casing, Diffuser, Gland Housing, Impeller and Mechanical Seal. Two (2) year warranty on motor and in all commercial applications. That is how confident we are in the quality of our German Engineered Speck Pump. 

*Please Note - The pouring of salt and chemicals directly into the skimmer box will void full warranty