Winterise Your Pool
in 5 Simple Steps
✨ 15 minutes to apply • 24–48 hours to stabilise • Protected for 3 months
📋 Before you start — prep checklist
- Test pool water (chlorine & pH) — target Cl 1-3ppm before starting
- Clean your filter & brush surfaces
- Pump ready to run for 24h after Day 1 steps
- Skimmer sock on hand if you have a CARTRIDGE filter (Step 4)
🚫 Do NOT swim until: Chlorine 2–4 ppm AND pH 7.2–7.6.
Minimum wait: 24 hours after Oxi Shock (Step 5). Always test before swimming.
🧤 What NOT to do: Never mix chemicals directly. Keep products away from children/pets. Wash hands after handling. Store in cool dry place.
📞 Emergency: Poisons Information 13 11 26 | If in eyes, rinse thoroughly.
🔧 Troubleshooting — "What if…"
- ❓ No change after 48h? → Ensure pump ran 24h after Crystal Tablet. Retest chlorine/pH, run pump another 24h.
- ❓ Chlorine already high before starting? → Skip Step 1 (Stabilised Chlorine) entirely. Continue with Steps 2-5.
- ❓ Pool size bigger than 60kL? → Use 1.5–2 bundles. Double algaecide & phosphate remover; do not double Stabilised Chlorine unless test shows low.
- ❓ Cartridge filter without skimmer sock? → The Crystal Tablet may damage cartridge elements. Use a skimmer sock.
❄️ Quick FAQ
No. Wait until chlorine is 2-4 ppm and pH 7.2-7.6. Minimum 24 hours after Oxi Shock.
Yes — compatible with salt, chlorine, magnesium, and mineral pools.
No, the Winteriser Bundle is safe for all listed surfaces.
Up to 3 months. The Crystal Tablet releases slowly over this period.
Run for 2–4 hours each week to keep water circulating and chemicals mixed.
📱 1300 511 901 | ✉️ hello@mrpoolman.com.au
💬 Live chat — Avg. reply under 2 hours
🧴 Need another Winteriser Bundle or refills?
Head to our main Winterise page to check bundle options, refills, and winter guides.
📦 Visit Winterise Your Pool →© Mr Pool Man — evergreen instruction guide for Winteriser Bundle. Always verify water chemistry before swimming.