The Best Pool Cleaners in Australia

A robotic pool cleaner is a self-contained unit that runs independently of your pool's pump and filter system. They are highly efficient, intelligent, and clean all surfaces. A suction pool cleaner connects to your skimmer box and uses the pool pump's suction to move and clean, making them a very reliable and cost-effective option.

Yes! All the cleaners we recommend are designed to be safe and effective on all common Australian pool surfaces, including vinyl liners, fibreglass, pebblecrete, and tiles. They are the best pool cleaners for inground pools of all types.

For best results, we recommend running your automatic pool cleaner 2-3 times per week for 2-4 hours at a time. During heavy use or after a storm, you might need to run it more frequently to keep your pool pristine.

Most advanced robotic cleaners, like the Hydro4, are designed to climb walls and can handle some steps and benches. However, due to the varying depths and sharp angles of stairs, no cleaner is 100% perfect at scrubbing every inch of a step. It's always good practice to quickly brush any debris off the steps onto the floor before running your cleaner for the best results.

While you can leave suction cleaners in the water (as they are part of the circulation system), it's highly recommended to remove robotic cleaners after their cycle finishes. Constant exposure to pool chemicals (like chlorine) and sun can degrade the plastic housing and filters over time. Removing and rinsing your robot after use will significantly extend its lifespan.

Yes, but you may need to adjust the speed. Variable speed pumps are great for energy saving, but running them on the lowest setting might not provide enough suction for a cleaner like the Viper or Matrix to climb walls effectively. You'll simply need to find the "sweet spot" RPM that provides enough suction for the cleaner while still being energy efficient.

Robots are amazing at scrubbing, but they can't reach every tiny nook and cranny. We recommend giving your pool walls a quick brush once a week or fortnight to loosen any algae spores or fine dust that might be clinging to the surface, allowing your robot or filtration system to filter it out more easily.

Modern cleaners are designed with "anti-stuck" technology. However, ladders or unique pool shapes can sometimes trap them. For suction cleaners, adjusting the hose length, weights, or the deflector wheel usually solves the issue. For robots, they have programmed reverse cycles to free themselves. If it happens persistently, check that the cable isn't tangled or too short.