The essential power source for a safe, stable 12V AC pool light system. Pairs with any Vivid or Aura light.
Do I need one? If you're replacing an old halogen, your existing transformer will likely work. Setting up from scratch or your transformer is faulty? The LinX is what you need.
Best Value
60VA: Dual Output
Powers up to 2 pool lights
Silent, cool-running 12V AC
Room to add a second light later
Loading...
In Stock
30VA: Single Light
Powers 1 pool light
Silent, cool-running 12V AC
Compact single-light solution
Loading...
In Stock
Hassle-Free Setup
Installation in 3 Simple Steps
Our retro-fit lights replace 99% of existing pool lights. No pool draining. Most pools done in under an hour.
1
Remove Old Light
Detach your existing surface-mount or niche light. Our system works with the cable you already have in the wall.
2
Fit the Bracket
Screw the universal retro-fit bracket using existing holes. No drilling into your pool liner or concrete.
3
Connect and Click
Connect the wires (consult a licensed electrician), coil the cable neatly, and click the new light into place.
Verified Reviews
Don't Just Take Our Word For It
★★★★★4.9 / 5·1,200+ verified reviews
★★★★★
"The multi-colour light is amazing. Our backyard has been completely transformed. Best upgrade we've made."
Jenny K.
Brisbane, QLD
Verified Buyer
★★★★★
"Replaced our old halogen niche light with the Aura LED. So much brighter and the blue is stunning."
Mike T.
Central Coast, NSW
Verified Buyer
★★★★★
"Simple, effective, and looks fantastic. The Vivid retro light was the perfect upgrade. Electrician had it done in 30 minutes."
David R.
Adelaide, SA
Verified Buyer
Got Questions?
Frequently Asked Questions
Yes. Our Vivid and Aura retro-fit pool lights use a universal bracket system designed to replace most Australian pool lights including Spa Electrics, AstralPool, Aqua-Quip, Sunline, and PAL Lighting. In most cases your existing transformer works too.
The Vivid is a surface-mount light. It mounts to the pool wall surface using a universal bracket and suits most Australian pools. The Aura is a wet-niche light. It sits inside a recessed niche in the pool wall and is the upgrade path for pools that already have a niche-style fitting. If you're unsure, look at your existing light: if it protrudes from the wall, it's surface mount; if it sits flush in a cavity, it's niche.
A halogen pool light typically burns 300W to 500W and needs replacing every 12 to 18 months at $30 to $60 per bulb plus electrician callout fees. Our LED uses 30W to 45W and lasts 50,000+ hours with zero bulb changes. Most pool owners save $120 to $200 per year on running costs alone. The light pays for itself inside 18 months.
No draining needed. For surface mount lights like the Vivid, the fixture is pulled to the pool deck. However, the wiring connection to the transformer must be done by a licensed electrician. This ensures your installation is safe, compliant, and covered by warranty.
Multi-colour lights use a simple on/off cycling function. Flick the power switch on and off quickly to cycle through colour modes. When you reach your preferred colour or mode, leave the light on for about 10 seconds to lock it in. It will recall that setting each time it powers on.
If you're replacing an old halogen light, you likely already have a compatible 12V transformer. Our retro-fit lights are designed to work with existing equipment. Verify the wattage output of your transformer matches the total wattage of all lights you're powering plus a 20% buffer. If you need a new one, the Water TechniX LinX transformer is the recommended pairing.
One Water TechniX LED light comfortably illuminates pools up to 8m x 4m. For larger pools, two lights positioned at each end provide even coverage. The Pure White model is ideal for maximum brightness across bigger areas.
Transform Your Pool Tonight
Light Up Your Pool the Right Way
Premium LED quality, Australian pool-ready, and designed to retrofit without draining your pool or your wallet.
