Water TechniX Stain Remover 1kg
product.title
Eliminates rust, iron, leaf, and mineral stains from pool surfaces, driveways, and fences. No scrubbing required.
- All stain types: rust, iron, leaf, mineral, organic
- Surface safe: concrete, pebblecrete, fibreglass, vinyl, tile
- No scrubbing: sprinkle, wait, brush gently
The Stain Nightmare
section.settings.heading
You've scrubbed, shocked, and tried every pool shop remedy. Yet those rust, leaf, and mineral stains keep staring back. Left untreated, they're slowly etching into your pool surface permanently.
Endless Scrubbing
Back-breaking brushing with zero lasting results. The stains always come back.
Wasted Money
Generic acids and pool shop remedies simply don't work on deeply embedded stains.
Permanent Damage
Left untreated, stains etch permanently into pool surfaces. A $3,000+ problem.
One Jar Isn't Enough
Stains spread across pool, driveway, and fence. 4 bottles covers everywhere. Buy 3, Get 1 FREE.
How Stain Remover Eliminates Stains
A proprietary organic acid blend (Active: Oxalic and Citric Acid 980g/kg) chemically reacts with rust, iron, and mineral deposits, breaking them down at the molecular level so they lift away without scrubbing.
Targeted Application
Sprinkle directly onto stains. The powder sits exactly where needed for maximum potency.
Chemical Reaction
Organic acids dissolve rust, iron, and mineral bonds at the molecular level. No scrubbing needed.
Gentle Brush-Off
After 1 to 2 hours, stains lift away with a light brush. The surface underneath is unharmed.
Multi-Surface Protection
Safe for every pool surface and outdoor hard surface. One jar, everywhere you need it.
See the Transformation
Actual results from pool owners just like you. No AI, no filters. Just the product doing its job.
Swim Season Warning
Ignore Stains Now. Pay Thousands Later.
Winter did the damage. Now the pool sits under covers, and every rust and mineral stain has been etching deeper for months. What looked like a cosmetic mark is now a permanent scar you'll see the moment the cover comes off. One treatment now with 4 bottles covers your entire pool and outdoor areas for a fraction of what resurfacing costs.
Simple Steps to a Spotless Pool
Application Instructions
Lower Chlorine Levels
Reduce chlorine to 0 to 1 ppm before application. The stain remover works best in low-chlorine water.
Apply the Product
For concrete, pebblecrete, quartz, and tile: with pump OFF, sprinkle powder directly onto stains. For fibreglass and vinyl: use the sock method only. For driveways and fences: sprinkle, add water, let sit, then rinse.
Let It Work, Then Brush and Rebalance
Allow 1 to 2 hours for light stains, or overnight for stubborn marks. Gently brush treated areas. Rebalance water to pH 7.2–7.6 and chlorine 1.5–3.0 ppm.
Why This Works When Others Don't
| Water TechniX | Pool Shop Treatments | |
|---|---|---|
| Specialist pool formula | ✓ | ✗ |
| Broad-spectrum stain removal | ✓ | ✗ |
| No scrubbing required | ✓ | ✗ |
| Safe for all pool surfaces | ✓ | ✗ |
| Multi-use: pool and yard | ✓ | ✗ |
Oxi Shock 500g: The Perfect Follow-Up
After the Stain Remover does the heavy lifting, use Oxi Shock to clear any cloudiness, burn off organics, and restore that sparkling finish. Chlorine-free and swim-ready in 15 minutes.
What Our Customers Are Saying
"Bought the 4-pack to do the pool and ended up using 2 jars on my driveway and fence. Rust marks from the gate, oil stains. All gone."
"We had terrible leaf stains after a big storm. This lifted them right off our pebblecrete without any fuss. Worked better than the pool shop brand."
"Was worried about using anything strong on fibreglass. Used the sock method and it was perfectly safe. No damage, no clouding. Gel coat looks brand new."
Frequently Asked Questions
Results often show within 2 hours. For stubborn stains, leave overnight. With 4 bottles you can treat every stain in one session and have your pool ready for swim season.
Yes, when used correctly. For fibreglass and vinyl pools, apply using the sock method rather than direct contact to avoid any risk of bleaching.
Absolutely. The same formula works on rust marks, oil stains, and grime on concrete, pavers, and fences. Do a spot test on painted or natural stone surfaces first.
Because you can get ahead of the season. Fix stains now and your pool will be spotless the moment you're ready to swim. The longer stains sit, the deeper they etch and the harder they are to remove.
Treat Every Stain Before First Swim Reveals Them All.
4 bottles for $179.97. That's $44.99 each. Enough to treat pool, driveway, fence, and have a spare. Free shipping included.