Erase Stubborn Pool Stains for Good
Rust, iron, leaf, and mineral stains don't just look bad. Left untreated, they permanently etch into your pool surface. What starts as a cosmetic issue becomes a $3,000+ resurfacing bill.
Water TechniX Stain Remover 1kg
Choose your pack
Stains left untreated permanently etch into your pool surface. Resurfacing costs $3,000 to $8,000. Treating stains now with 4 bottles covers every mark for a fraction of that cost.
Don't let stains become permanent: What looks cosmetic today etches deeper over time. One treatment now prevents a $3,000+ resurface later. 4 bottles covers your whole pool and outdoor areas.
- Eliminates All Stain Types: Rust, iron, leaf, mineral, and organic stains. Pool and around the yard.
- Surface Safe: Concrete, pebblecrete, quartzon, fibreglass, vinyl and tile. Also safe on driveways, pavers, and fences.
- No Scrubbing Required: Sprinkle on, let it work, brush gently. Stains dissolve. You don't scrub.
- Eco-Friendly Formula: 980g/kg Organic Acid Blend (Oxalic and Citric). Biodegradable.
- Multi-Use Power: Same jar works on pool stains, driveway rust marks, fence grime, and outdoor hard surfaces.
Winter is the perfect time to treat stains. Lower chlorine levels and less pool use mean the stain remover works faster. Fix stains now and your pool will be spotless when summer arrives.
Why This Works When Others Don't
Quick Answers
Results often show within 2 hours. For stubborn stains, leave overnight. With 4 bottles you can treat every stain in one session. Winter is ideal because lower chlorine helps the formula work faster.
Yes, when used correctly. For fibreglass and vinyl pools, apply using the sock method rather than direct contact to avoid any risk of bleaching. Fill a sock with the powder, scrub the stain, then hang it over the spot. This lets the formula work without direct surface contact.
Absolutely. The same formula works on rust marks, oil stains, and grime on concrete, pavers, and fences. Do a spot test on painted or natural stone surfaces first. Not recommended for marble or limestone.
Winter is the perfect time. Chlorine levels are naturally lower so you skip the first step. Plus the pool isn't being used so you can let the treatment sit as long as needed. Fix stains now and you'll open to a spotless pool in spring.
See the Transformation
Actual results from pool owners just like you. No AI, no filters. Just the product doing its job.
The Stain Nightmare
You've scrubbed, shocked, and tried every pool shop remedy. Yet those ugly rust, leaf, and mineral stains keep staring back at you. Left untreated, they're slowly etching into your pool surface permanently.
Endless Scrubbing
Back-breaking brushing with zero lasting results. The stains always come back.
Wasted Money
Generic acids and pool shop remedies simply don't work on deeply embedded stains.
Permanent Damage
Left untreated, stains etch permanently into pool surfaces. A $3,000+ problem.
One Jar Isn't Enough
Stains spread across your pool, driveway, and fence. 4 bottles covers everywhere. Buy 3, Get 1 FREE.
How Stain Remover Eliminates Stains
Water TechniX Stain Remover uses a proprietary organic acid blend (Active: Oxalic and Citric Acid 980g/kg). It chemically reacts with rust, iron, and mineral deposits, breaking them down at the molecular level so they lift away without scrubbing.
Targeted Application
Sprinkle directly onto stains. The powder sits exactly where needed for maximum potency.
Chemical Reaction
Organic acids dissolve rust, iron, and mineral bonds at the molecular level. No scrubbing needed.
Gentle Brush-Off
After 1 to 2 hours, stains lift away with a light brush. The surface underneath is unharmed.
Multi-Surface Protection
Safe for every pool surface and outdoor hard surface. One jar, everywhere you need it.
Simple Steps to a Spotless Pool
With 4 bottles, you can treat pool, driveway, and fence in one session. Winter is the ideal time.
Application Instructions
Lower Chlorine Levels
Reduce chlorine to 0 to 1 ppm before application. The stain remover works best in low-chlorine water. Winter naturally keeps chlorine lower so you may already be close.
Apply the Product
For Concrete, Pebblecrete, Quartzon, and Tile:
With pump OFF, sprinkle powder directly onto stains. For wall stains, use the sock trick. Fill a sock with powder, scrub, then hang over the spot.
For Fibreglass and Vinyl Pools:
Use the sock method only. Direct application may cause bleaching on these surfaces. Fill a sock with powder, scrub the stained area, then hang the sock over the spot to let the formula work safely.
For Driveways, Fences and Outdoor Surfaces:
Sprinkle directly onto rust marks, oil stains, or grime. Add a little water to activate. Let sit, then rinse. Spot test on painted or natural stone first.
Let It Work, Then Brush and Rebalance
Allow 1 to 2 hours for light stains, or overnight for stubborn marks. Since the pool isn't being used in winter, you can let it sit as long as needed. Gently brush treated areas. Stains lift away easily. Rebalance water to pH 7.2 to 7.6 and chlorine 1.5 to 3.0 ppm. Use Oxi Shock to restore sparkle.
Important Safety Note
Wait until stains are fully treated and water chemistry is rebalanced before swimming. Always spot test on outdoor surfaces before full application. Not recommended for marble or limestone. For fibreglass and vinyl pools, use the sock method only.
Before re-entering the pool, ensure your water is balanced:
- ✓ Chlorine: 1.5 to 3.0 ppm
- ✓ pH: 7.2 to 7.6
Always read and follow the full product label instructions and safety precautions.
Oxi Shock 500g: The Perfect Follow-Up
After the Stain Remover does the heavy lifting, use Oxi Shock to clear any cloudiness, burn off organics, and restore that sparkling finish. Chlorine-free and swim-ready in 15 minutes.
Dosage: 1 x 500g tub treats up to 40,000L.
- Restores Sparkle: Clears any cloudiness after stain treatment.
- Eliminates Itch: Removes chloramines that cause itchy skin and red eyes.
- Lightning Fast: Swim-ready in just 15 minutes.
What Our Customers Are Saying
Works on every pool surface, and around the yard
More from our customers
"Simple to use and very effective. It got rid of some weird mineral buildup that's been bugging me for ages. The pool looks brand new again. Highly recommend!"
"What a lifesaver! I was so over spending my weekends scrubbing. This stuff saved me so much time. My pool has never looked this good. Highly recommend it!"
"Was getting so frustrated with stubborn rust stains. I just followed the instructions and within a few hours the patches were gone. Pool is looking crystal clear again."
Buy 3, Get 1 FREE
Treat Every Stain Before Damage Is Permanent
4 bottles for $179.97. That's $44.99 each. Enough to treat your pool, driveway, fence, and have a spare. Free shipping included. Winter is the perfect time to treat stains while your pool sits unused.