This Gets Worse Over Winter.
Kill It Now.
Your pool gets neglected when it's cold. Black spot algae doesn't. It quietly embeds deeper into surfaces all winter and it'll be twice as bad when you open back up in spring.
Fix it in under 24 hours, before winter does the damage for you.
Water TechniX Black Spot Remover 1kg
How many jars?
Black spot algae etches into pool surfaces permanently if left untreated. Resurfacing a standard pool costs $3,000 to $8,000. Treating it now is the only cheap option.
The highly concentrated, professional-grade formula penetrates deeply to destroy even the most resilient black spot algae roots. Don't let another winter make this harder to fix.
❄️ Winter Warning: Black spot embeds deeper the longer you leave it. Fix it before winter does the damage or pay twice to fix it in spring.
Note: For heavy infestations, a second application is often recommended.
- Dosage: 1kg treats up to 25,000L.
- Kills Black Spots Fast: Visible results in under 24 hours.
- Surface Safe: Concrete, pebblecrete, quartzon, fibreglass, vinyl & tile.
- Concentrated Power: 900g/kg Trichloroisocyanuric Acid.
- Prevents Regrowth: Kills the root to stop it coming back season after season.
Why This Works When Others Don't
Quick Answers
Most pool owners see black spots turning grey within 24 hours. For heavy infestations a second application a week later is recommended.
Yes. For fibreglass, vinyl, quartzon and tiled pools, add it via the skimmer basket rather than direct application to avoid bleaching. Concrete and pebblecrete can be spot-treated directly.
Wait at least 48 hours and confirm chlorine is back to 2 to 4 ppm and pH is 7.2 to 7.6 before swimming.
Absolutely, and you should. Black spot algae doesn't go dormant in winter. It continues to grow and embed deeper into your pool surface. Treating now means it won't be double the problem when you reopen in spring.
See the Transformation
Actual results from pool owners just like you. No AI, no filters. Just the product doing its job.
The Black Spot Nightmare
You've scrubbed, shocked, and tried every DIY trick. Yet those stubborn, deeply rooted black spots keep coming back, and heading into winter, they're about to get a whole lot worse.
Endless Scrubbing
Back-breaking brushing with zero lasting results. The spots always come back.
Wasted Money
Regular algaecides simply don't work on black spot algae. It has a protective waxy layer.
Permanent Damage
Left untreated, black spot algae etches into and ruins pool surfaces permanently.
❄️ Winter Makes It Worse
Pools get ignored over winter. Meanwhile, black spot quietly embeds deeper into surfaces, making spring treatment far harder and more expensive.
Winter Insight
Ignore It Now. Regret It in Spring.
Most pool owners don't think about black spot in autumn and winter. That's exactly why it's so destructive. While your pool sits unused, algae isn't resting. It's burrowing deeper into the surface, spreading its root system, and making itself harder to kill. What takes one treatment now could take two or three by spring.
Yes, It's Serious Chemistry. Here's How to Use It Safely.
Trichloroisocyanuric Acid is a professional-grade active ingredient. That's what makes it work when nothing else does. Follow these three steps and you'll have no issues.
Wait 48 hours before swimming
The formula super-chlorinates the water to kill algae at the root. Before getting back in, check that chlorine is between 2 and 4 ppm and pH sits between 7.2 and 7.6. A simple test strip takes 30 seconds and confirms it's safe.
Fibreglass, vinyl, quartzon or tiled pool? Apply via the skimmer basket
Direct application on softer pool surfaces can cause localised bleaching. Add the granules to your skimmer basket instead. The same high-concentration chlorine circulates through the water and kills the algae without touching the surface directly.
Concrete or pebblecrete pool? Spot treat directly on the affected areas
Hard surfaces handle direct contact without bleaching. Apply granules directly onto the black spot patches for maximum concentration right where it counts. Brush first to break the algae's waxy outer layer, then apply.
How Black Spot Remover
Annihilates Algae
Water TechniX Black Spot Remover uses a slow-dissolving, concentrated formula. It gradually releases high-strength granular chlorine (Active: Trichloroisocyanuric Acid 900g/kg) over 24 hours, breaking down the algae's tough outer layer and penetrating its root system to kill it completely.
Concentrated Power
High-strength formula targets algae directly where other products can't reach.
Slow Release Action
Gradually releases sanitiser over 24 hours for prolonged, sustained algae attack.
Penetrates & Destroys
Breaks down the protective waxy layers and kills algae at its core and roots.
Prevents Regrowth
Eliminates the source so it won't come back harder next season.
Simple Steps to a Spotless Pool
❄️ Works in all seasons. Treat now so winter doesn't make it worse.
Application Instructions
Brush Affected Areas
Vigorously brush the black spots with a stainless steel brush (for concrete/pebble) or a nylon brush (for vinyl/fibreglass) to break the algae's protective waxy layer.
Apply the Product
For Concrete & Pebblecrete Pools:
Apply the product directly onto the affected areas (spot treat).
For Vinyl, Fibreglass, Quartzon & Tiled Pools:
Apply the product directly into the skimmer basket.
Why? Direct application on softer surfaces can cause bleaching. Adding it to the skimmer dissolves it safely while the high-concentration chlorine circulates and kills the algae.
Circulate Water
Run your pool pump for at least 24 hours to ensure even distribution and sustained contact with the algae.
Brush & Vacuum
After 24 to 48 hours, brush away dead algae (it typically turns grey/white) and vacuum the waste to waste or filter.
Important Safety Note
Do not swim for at least 48 hours after treatment. This product super-chlorinates the water, which may cause skin and eye irritation.
Before re-entering the pool, ensure your water is balanced:
- ✓ Chlorine: 2 to 4 ppm (Summer) | 2 to 3 ppm (Winter)
- ✓ pH: 7.2 to 7.6
Always read and follow the full product label instructions and safety precautions.
Oxi Shock 500g: The Perfect Follow-Up
After the Black Spot Remover does the heavy lifting, use Oxi Shock to clean up the mess. It oxidises the dead algae and organic waste, softens the water, and removes that itchy skin feeling.
Dosage: 1 × 500g tub treats up to 40,000L.
- Removes Dead Algae: Acts as the cleanup step for your pool after treatment.
- Eliminates Itch: Removes chloramines that cause itchy skin and red eyes.
- Lightning Fast: Swim-ready in just 15 minutes.
What Our Customers Are Saying
Works on every pool surface
More from our customers
"Honestly, I was about to give up. My pebblecrete pool was covered in black spots that just wouldn't budge. Gave this stuff a go and wow, it actually worked! The spots are completely gone."
"What a lifesaver! I was so over spending my weekends scrubbing. This stuff saved me so much time. My pool seriously has never looked this good. Highly recommend it!"
"Was getting so frustrated with stubborn black spots. I just followed the instructions and within a week the patches were gone. Pool is looking crystal clear again."
❄️ Don't Let Winter Win.
Deal With It Now.
Black spot spreads silently all winter. Buy in bulk now and treat it completely, before spring reveals just how bad it's gotten.